top of page

BRICK REPLACEMENT AND REPAIR

Brick Replacement and Spalled Brick Repairs in Durham

Dampline replaces spalled, cracked, blown and severely weathered bricks across Durham and County Durham. Our work covers localised wall repairs, exposed elevations, chimney stacks and areas affected by prolonged water penetration or inappropriate previous pointing.

SPALLED AND DAMAGED BRICKS

What is brick spalling?

Spalling is when part of a brick’s face flakes or breaks away. It can range from shallow surface damage to deeper loss that leaves the brick vulnerable to further weathering.

Why brick faces fail

Persistent wetting and freeze-thaw cycles can damage brick faces. Hard cement pointing, leaking gutters and exposed elevations can also contribute. Cracking may call for a separate check for movement.

When damaged bricks need replacing

Good to know

We assess how deep the damage goes and whether the brick remains sound. Local replacement may be appropriate where a brick has deteriorated beyond a practical repair.

BRICKWORK INSPECTION CHECKS

What we check before work starts

Depth of damage

We check the condition of the brick face and whether the body of the brick is still sound.

Moisture and mortar

We look for rainwater routes, persistent wetting and incompatible mortar that may be contributing to deterioration.

Movement and support

We consider crack patterns and the construction of the wall before deciding how to remove or replace damaged units.

Red-brick chimney stack where it meets a pitched roof.

BRICK REPLACEMENT METHODS

How we repair damaged brickwork

We plan local repairs around the wall construction, the condition of neighbouring bricks and the appearance of the finished work.

Removing and matching bricks

How Damaged Bricks Are Replaced
The defective brick is carefully cut out without unnecessarily damaging the surrounding masonry. Remaining mortar and loose material are removed from the opening before the replacement unit is installed. The new brick is bedded and pointed using a mortar selected for compatibility with the existing wall. The joint profile is finished to sit naturally with the surrounding masonry and manage rainwater appropriately.

Matching Replacement Bricks
An exact invisible match cannot always be guaranteed, particularly with older handmade or discontinued bricks. New masonry may also appear more prominent until the mortar and brick have naturally weathered. The objective is to install a technically suitable replacement that sits sympathetically within the existing wall rather than selecting by colour alone.

Solid walls and chimneys

Replacing Bricks in Solid Walls
Older solid-brick walls require careful repair because individual bricks may pass farther through the wall than the outer appearance suggests. The wall may also contain lime mortar and softer masonry. The removal method should avoid destabilising adjacent units or unnecessarily damaging the internal wall face. Replacement mortar should remain compatible with the traditional construction and allow appropriate moisture movement.

Chimney Brick Replacement
Chimney bricks receive severe exposure to rain, frost and wind. Damage often develops alongside failed pointing, cracked flaunching or defective caps and pots. Loose or deeply spalled chimney bricks may require replacement before the stack is repointed. Where deterioration affects numerous units or the stack has become unstable, partial rebuilding may be more appropriate than replacing individual bricks throughout the structure.

Repair options and pointing

Can Spalled Bricks Be Repaired Without Replacement?
Very minor surface defects may sometimes remain serviceable or receive an appropriate local repair. A deeply spalled brick that has lost much of its face cannot be restored to its original condition with mortar, filler or paint. Surface patches frequently differ from the brick in movement, absorption and weathering. They can separate from the remaining face or conceal continuing deterioration behind the repair.

Cracked Bricks and Building Movement
A cracked brick may result from frost damage, corrosion, impact or movement within the building. Replacing the brick will not resolve continuing structural movement. The pattern of cracking should be considered before local masonry repairs begin.

Brick Replacement and Repointing
Brick replacement and repointing often form parts of the same repair. Damaged units should usually be replaced before the surrounding elevation receives its final pointing. This produces a consistent repair and avoids newly pointed areas being disturbed later to replace damaged masonry.

BRICK REPAIR COSTS

Brick damage and damp

Deep damage and open joints can make brickwork more vulnerable to wind-driven rain. We also check gutters, seals and pointing to see whether another defect is keeping the bricks wet.

Where cracking suggests movement, the cause needs to be understood before individual bricks are replaced.

What affects replacement costs

Cost depends on the number of bricks, their location, access and how closely replacements need to match. Chimney or upper-wall work can require additional access. The quote may also include local repointing and work to address the moisture source.

What affects the recommendation?

MASONRY REPAIR FAQS

Your masonry repair questions, answered.

Find out when a wall may need repointing, what causes bricks to crumble and how we assess cracks and damp.

RELATED MASONRY AND DAMP SERVICES

Explore related services

These services may help if the inspection identifies related defects or work elsewhere on the property.

Brick & Stone Repointing

See when renewing mortar joints can be carried out alongside brick replacement.

Lime Mortar Repointing

Explore compatible pointing for older brick and stone masonry.

Ready to discuss your property?

Enquire now for friendly and professional advice about your issue or property.

bottom of page