top of page
WET ROT SIGNS AND CAUSES
What wet rot looks like
Wet rot is often concealed beneath floors, behind skirting boards or within roof structures. The visible symptoms vary depending on the fungus, timber type and moisture source.
Where the moisture comes from
Wet rot develops where timber is exposed to excessive moisture for long enough to support fungal growth. This may result from a direct leak or from ongoing damp and ventilation problems.
Spotting wet rot in timber
Good to know
Wet rot usually develops near a persistent source of moisture. The timber’s remaining strength and the extent of the affected area determine the repair.
WET ROT INSPECTION CHECKS
What we check before work starts
Timber condition
We inspect accessible timbers for softness, cracking, decay and loss of strength.
Source of moisture
We check for local leaks, damp masonry and condensation that could be keeping the timber wet.
Extent and ventilation
We assess surrounding timber and airflow, with controlled access where damage is concealed.

WET ROT REPAIR METHODS
How we treat wet rot
We use the inspection findings to plan the work. Here is what wet rot treatment can involve.
Wet Rot in Floor Joists
Floor joists are particularly vulnerable where their ends enter damp external walls or where airflow beneath the floor is restricted. Plumbing leaks and high subfloor humidity can also affect the joist along a wider area.
Early decay may be limited to one joist end or a small section. More advanced wet rot can cause several adjacent joists to lose strength, leaving the floor soft, bouncy or uneven.
Repairs may involve:
• Localised joist-end replacement
• Strengthening a suitable retained joist
• Complete replacement of affected joists
• New joist hangers or wall plates
• Repairing supporting sleeper walls
• Replacing rotten floorboards
• Improving subfloor airflow
• Separating new timber from damp masonry
The repair is determined by the extent of structural damage rather than the appearance of the exposed surface alone.
Wet Rot in Floorboards and Wall Plates
Floorboards may decay following prolonged contact with damp joists, leaks or humid subfloor conditions. Damaged boards can split, soften or become unsafe underfoot.
Wall plates and other support timbers can also deteriorate where they rest on damp masonry. If these components weaken, movement may affect a larger area of the floor even where some joists remain sound.
Dampline assesses the complete support arrangement and replaces components that have lost structural integrity. Treating the boards while leaving a rotten wall plate beneath them would not resolve the floor defect.
Wet Rot in Roof Timbers
Roof leaks, defective flashings, blocked gutters and condensation can expose rafters, purlins, wall plates and roof decking to prolonged moisture.
The visible staining may extend beyond the structurally damaged area, so wet timber is not automatically rotten timber. The affected wood should be checked to determine whether it can dry and remain in service or requires physical repair.
Where structural roof timbers are involved, the moisture source must be repaired before the affected area is closed. Significant damage or unusual roof loading may also require a structural repair specification.
How Wet Rot Is Treated
The precise method depends on the moisture source, fungus and degree of timber deterioration. A typical wet rot repair may involve:
• Locating and resolving the moisture source
• Opening the affected area to establish the full extent
• Removing timber that has lost structural strength
• Repairing or replacing joists, boards or supporting timbers
• Applying an appropriate timber treatment where specified
• Improving ventilation or damp separation
• Allowing the surrounding construction to dry
• Reinstating the floor, wall or roof finishes
Not every project requires every step. The treatment should be proportionate to the confirmed damage and cause.
Why Preservative Treatment Alone Is Not Enough
A timber preservative may help protect suitable retained wood or control fungal activity as part of a wider repair. It cannot dry the building, repair a leak or restore strength to decayed timber.
Soft, fractured or severely weakened structural wood requires a physical repair or replacement. Coating it with a treatment product does not make it capable of safely supporting the floor again.
Dampline’s approach prioritises moisture control and structural repair. Treatment products are used where appropriate rather than presented as a substitute for resolving the cause.
Wet Rot Repairs and Floor Reinstatement
Where wet rot has affected the floor structure, Dampline can complete the remedial work from initial opening through to structural reinstatement.
The service can include:
• Removal of decayed materials
• Joist-end repairs
• Full joist replacement
• Wall-plate and support repairs
• Replacement floorboards
• Subfloor ventilation improvements
• Suitable insulation between renewed joists
• Reinstatement ready for the selected floor covering
This coordinated approach avoids the customer needing separate damp, timber and floor-repair contractors for connected parts of the same problem.
VENTILATION AND REPAIR COSTS
Wet rot and ventilation
Blocked airbricks or poor crossflow can keep the space beneath a suspended floor humid. We check whether vents need clearing, replacing or adding, and whether airflow can pass through sleeper-wall openings.
Ventilation helps protect retained and replacement timber once direct moisture sources, such as a plumbing leak or rain entering through masonry, have been addressed.
Wet rot treatment costs
The cost depends on where the moisture comes from, how easily the timber can be reached and how much has lost strength. A local joist-end repair will have a different scope from decay across an entire floor.
The quote can also include repairs to the moisture source, ventilation improvements and reinstating boards or other finishes, depending on the inspection findings.
What affects the recommendation?
TIMBER REPAIR FAQS
Your timber repair questions, answered.
Find out what we install, how we check suitability and what to do if you already have insulation or a damp problem.
RELATED TIMBER AND REPAIR SERVICES
Explore related services
These services cover related issues that may also need attention.
bottom of page
