top of page

BRICK AND STONE REPOINTING

Brick, Stone and Chimney Repointing in Durham

Dampline provides professional repointing for brickwork, stone walls and chimney stacks across Durham and County Durham. We carefully remove deteriorated mortar using a mortar rake before installing a suitable new lime or cement-based mortar selected for the property.

REPOINTING SIGNS AND CAUSES

Signs to look for

Crumbling mortar, deep or open joints and loose pointing are signs the wall may need attention. Damp that worsens after rain can be a clue, particularly on exposed walls or around chimneys.

Why joints deteriorate

Wind-driven rain, frost and leaking gutters can wear down mortar. Shallow patch repairs or mortar that is too hard for the surrounding brick or stone can also contribute to damage.

When mortar joints need attention

Good to know

A small crack alone does not establish that the whole wall needs repointing. We check the extent of the deterioration and the condition of the surrounding masonry first.

MASONRY AND MORTAR CHECKS

What we check before work starts

Joint condition

We look at how deeply the joints have weathered and where the existing mortar has lost its bond.

Sources of moisture

We check rainwater routes, exposed elevations and chimney details for defects that may be soaking the wall.

Mortar compatibility

We assess the original mortar and the strength and condition of the brick or stone before choosing a mix.

Exposed interior brickwork with chipped brick faces and worn mortar joints.

BRICK AND STONE REPOINTING

How we renew weathered joints

We remove failed mortar, prepare the joints and apply a compatible mortar. The scope depends on what the inspection shows.

Preparing the joints

Removing Old Mortar with a Mortar Rake
Successful repointing depends heavily on preparation. Applying a thin layer of new mortar over a weathered joint may create a temporary cosmetic improvement but provides little depth or durability. Dampline uses a mortar rake to remove loose, deteriorated and unsuitable mortar from the joints. The tool must be controlled carefully to avoid widening the joint or damaging the edges of the bricks or stone.

Why Shallow “Patch Pointing” Fails
Smearing new mortar across the face of old joints is sometimes described as patch pointing or ribbon pointing. Where the underlying mortar remains loose, the thin surface layer has little sound material to bond to. Local repairs can be appropriate where deterioration is genuinely isolated. However, each failed joint still requires suitable preparation rather than a cosmetic coating over the surface.

Choosing and finishing mortar

Brick Repointing
Brick repointing requires the failed mortar to be removed without unnecessarily damaging the brick edges. The new joint must then be filled to a suitable depth and properly compacted. Dampline uses a mortar rake to remove defective material in a controlled manner. Remaining loose debris is cleared from the joint before the new mortar is applied.

Stone Wall Repointing
Stone properties require careful mortar selection because the masonry can vary significantly in strength, porosity and construction. County Durham contains traditional stone cottages, rural homes, boundary walls and buildings constructed with irregular rubble cores. These should not automatically be treated like modern brick cavity walls.

Lime Mortar Repointing
Lime mortar is often appropriate for older brick and stone buildings constructed using traditional materials. It is generally more flexible and vapour-permeable than strong modern cement mortar, allowing movement and moisture evaporation through the joints. Lime mortar is not selected simply because a building looks old. The existing construction, masonry and exposure should be considered before the mortar is specified.

Cement-Based Mortar Repointing
Cement-based mortar may be appropriate for many modern brick and block constructions where its strength and moisture characteristics are compatible with the surrounding masonry. The mix should still be proportionate to the property. Stronger is not automatically better. A mortar that is significantly harder and less permeable than the bricks can contribute to cracking, trapped moisture and damage to the masonry face.

Matching the Mortar and Joint Finish
Mortar has a major influence on the appearance of a brick or stone elevation. Colour can vary according to the sand, binder, proportions and curing conditions. The existing joint profile should also be considered. Flush, recessed, weather-struck and traditional finishes produce different appearances and manage water differently.

Chimneys and damaged bricks

Chimney Stack Repointing
Chimney stacks are among the most exposed parts of a property. Their mortar joints face rain, frost and wind from every direction, often causing them to deteriorate faster than sheltered walls. Dampline repoints suitable brick and stone chimney stacks as part of this service. The stack should also be assessed for other defects, including damaged bricks, defective flaunching, caps, pots and relevant roof junctions. Repointing alone will not resolve a separate defect elsewhere on the chimney.

Replacing Damaged Bricks During Repointing
Repointing cannot repair a brick that has lost its face, fractured or become severely weakened by frost. Damaged units may need to be cut out and replaced before the surrounding joints are completed. Dampline can identify bricks and stones requiring separate repair or replacement. The replacement masonry should provide a practical match in size, colour and texture while remaining compatible with the wall.

REPOINTING COSTS AND CONSIDERATIONS

Older walls and damp

Older brick and stone walls may need a more compatible mortar and gentler preparation. We look at the existing joint finish, exposure and past repairs before specifying the work.

If damp worsens after rainfall, we assess whether open joints are admitting water and check other routes such as gutters, flashings and seals.

What affects repointing costs

The quote depends on the area and depth of failed joints, the mortar needed and access. Chimneys or upper elevations may require scaffolding. Damaged bricks or stone and repairs to rainwater defects can also affect the scope.

What affects the recommendation?

MASONRY REPAIR FAQS

Your masonry repair questions, answered.

Find out when a wall may need repointing, what causes bricks to crumble and how we assess cracks and damp.

RELATED MASONRY AND DAMP SERVICES

Explore related services

These services may help if the inspection identifies related defects or work elsewhere on the property.

Lime Mortar Repointing

Explore compatible mortar options for older brick and stone walls.

Brick Replacement & Spalled Brick Repairs

See how damaged bricks can be assessed and replaced alongside repointing.

Ready to discuss your property?

Enquire now for friendly and professional advice about your issue or property.

bottom of page